If you are facing “DNS Server not Responding problem” on your computer and looking for the solution to fix, then you are in right place. In this article, we are discussing on “How to Fix DNS Server not Responding WiFi on Windows 10/8.1/8/7” in details and providing easy & recommended steps to do so. Let’s starts the discussion.

What is DNS Server not Responding Error?

“DNS Server” or Domain Name System server acts as translator between IP address and hostname. It is used since it is easier for you to understand and remember the words than numbers, but also because computers need to use IP addresses to access the website. DNS server allows improved connection speeds by skipping the DNS request period.

“DNS Server not Responding” is common error reported by numerous Windows users on various online platforms including Microsoft Official forum sites and popular platforms and asked for the solution. Users explained that in order to troubleshooting their network connection, they receive this error on the system screen. It might possible to get this error due Internet failure problem, network adapter driver missing or corrupted, and/or your wi-fi network adapter driver is not compatible with Windows Operating System you are using.

But it is possible to fix DNS Server not Responding problem by troubleshooting the network connection, disabling extra connections, flushing or resetting the DNS cache, rebooting your router and changing the computer’s default DNS server. Don’t be panics, please read & follow our instructions below to fix.

[Tips & Tricks] How to Fix DNS Server not Responding WiFi Error Windows 10/8.1/8/7?

Procedure 1: Disable Internet Protocol Version 6 (IPv6)

If IPv4 (Internet Protocol Version 6) is causing problem like DNS Server not Responding Error on your Windows device, then you can disable it via Network and Sharing Center.

Step 1: Click on “Start” button and click on “Control Panel”

Step 2: In the opened “Control Panel” window, click on “View Network Status” under “Network Internet”

Step 3: In the “Network and Sharing center” window opened, click on your Ethernet connection

Step 4: In the next window, click on “Properties” and look for “Internet Protocol Version 6 (IPv6)”

Step 5: Uncheck the checkbox to disable it

Step 6: Finally, click on “Apply” and “Ok” to save the changes. Once done, please check if the problem is resolved.

Procedure 2: Change DNS server to fix DNS Server not Responding WiFi issue

If the current DNS server is problematic or facing “DNS Server not Responding” Error with your IP DNS server, then you can change it. In this case, you can attempt to change your DSN server to “Google’s Public DNS”.

“Google’s Public DNS” is a free Domain Name System (DNS) available as alternative for internet users around the world. It functions as a recursive name server providing domain resolution for any host on the Internet.

Step 1: Press “Windows + X” keys together from keyboard and select “Network Connections”

Step 2: Select your connection type on left pane and click on “Change Adapter Options” on the left pane

Step 3: Right-click on your connection and choose “Properties”

Step 4: Select “Internet Protocol Version 4 (TCP/IPv4)” and click on “Properties”

Step 5: In the “Internet Protocol Version 4 (TCP/IPv4)” properties window, enter “8.8.8.8” as the “Preferred DNS server” and enter “8.8.4.4” as “Alternative DNS server”

Step 6: Finally, click on “OK” to save the changes. After that, please check if the trouble is resolved.

Procedure 3: Clear your DNS Cache and Reset your IP using Command Prompt

Step 1: Press “Windows + X” keys together from keyboard and select “Command Prompt as Administrator”

Step 2: Type the following command in command prompt one-by-one and hit “Enter” key after each

ipconfig /flushdns

 ipconfig /registerdns

 ipconfig /release

 ipconfig /renew

Step 3: Wait to complete the process. Once done, please restart your computer and try to access the website you want to go again.

Procedure 4: Restart your MODEM and Router

If the above procedures won’t help you to resolve “DNS Server not Responding” problem, then you can try to restart your router and modem to fix. If there is “ON/OFF” button on your router, then you can simply press turn Off button on your router. Wait for few seconds and after that you need to turn it ON, and please check if it works.

To reset router to its default settings, follow the steps below:

Step 1: Open your router’s configuration webpage and look for “Reset” option

Step 2: Hit “Reset” button the reset your router to its default settings

Step 3: If you can’t access the router’s webpage setup page, then perform resetting process by, press & hold “Reset” button for 10 seconds. This process will reset your router to its default settings.

Procedure 5: Update or reinstall network Adapter driver

Sometimes, this error occurs usually due to missing or corrupted network adapter driver. So, you need to update it

Step 1: At first, you need to visit your network adapter manufacturer website and download the latest network driver according to your network adapter model and Operating System version

Step 2: Press “Windows + X” keys together from keyboard and select “Device Manager”

Step 2: In the opened “Device Manager”, locate “Network Adapters” category in the device list and expand it

Step 3: Right-click on your network adapter driver or Wi-Fi driver which shows “Yellow Exclamation Mark” on it and select “Update Driver Software..”

Step 4: In the next window, select “Browse my computer for driver software”

Step 5: Follow the rest of the instructions to finish the update process

Step 6: Once done, restart your computer to save the changes and please check if the problem is resolved.

Procedure 6: Update or reinstall Network Adapter driver or Wi-Fi driver [Automatically]

Download software for drivers update

If you don’t have enough time, patience or computer skills to update driver software manually, then you can try “Automatic Driver update software” to update it automatically. This software will automatically recognized your computer and find the latest driver software for it. To get this software, you can click on above link.

You may also read: How to Reinstall WiFi Driver for Windows 10 [Steps]

Conclusion

I am sure this article helped you to “How to Fix DNS Server not Responding WiFi problem on Windows 10/8.1/8./7” with several easy methods. You can read & follow our instructions mentioned above to do so. If you have any suggestions or queries regarding this, please write on comment box given below.