DVD Driver for Windows 10: Download/install or Update

DVD Driver for Windows 10” is essential software to communicate your DVD drives (Hardware) with Operating System version installed in your computer. For example, if Windows 10 based PC/laptop have DVD drives and want to work with your DVD drives, then you should make sure DVD Drivers is properly installed in your computer.

DVD Drives can easily be accessed by opening “File Explorer” or “Windows Explorer” as like all partition of hard disk drives is appeared. DVD drives can be used to install clean Windows 10 and/or other software in your computer.

As we know that to use DVD, we have to insert DVD to the computer and can be easily accessed by opening “File Explorer” and double-click on DVD drives. But sometimes, DVD drives doesn’t appeared in “File Explorer” due to some problem with DVD Driver.

In this case, you need to check if DVD drive is showing in “Device Manager” or not. To do so, open “Device Manager”, expand “DVD/CD-ROM Drives” category and check if there is “Yellow Exclamation Mark” or “Yellow Questioned Mark” on your DVD Drive, or is not showing in “Device Manager”. If it shows “Yellow Exclamation Mark” on it, then double-click on it to open its “Properties” window. This will show some errors in “Device Status” area.

Why CD/DVD Drive is not detected in Windows 10?

When you insert a DVD/CD into the drive and when you open File Explorer app/Windows Explorer in Windows 10 computer, the drive doesn’t display in File Explorer means Windows doesn’t recognize the drive. The possible reasons behind the issue can be incorrect or bad configured settings relating to CD/DVD in BIOS, or in Windows settings, issue with CD/DVD drive hardware and its connections, corrupted registry settings relating to DVD/CD drive, and other issues.

In such case, you can try to fix the issue by verifying if the drive is shown in BIOS, check drive name in Device Manager, running ‘Hardware and Devices’ troubleshooter, clearing the upper and lower registry filters, perform hard reset of computer, check internet cable connections, and test for hardware failures.

Why Optical Disk Drive is not recognized in Microsoft Windows?

There could be several reasons behind Optical Disk Drive like CD, DVD or Blu-Ray drive not recognized in Microsoft Windows PC, including the bad configuration or is damaged relating to the optical disk drive, Windows is unable to load the drivers that required for this device, corrupted/outdated DVD/CD driver, issue with CD/DVD drive hardware and its connections, and other issues. The error is appeared with various different error codes that shows some reasons for the problem as well.

Some common errors occurred when DVD Drive not showing in ‘Device Manager’:

  • A driver is not working properly because Windows cannot load the drivers required for this device. (Code 31)
  • A driver (service) for this device has been disabled. An alternate driver may be providing this functionality. (Code 32)
  • Windows successfully loaded the device driver for this hardware but cannot find the hardware device. (Code 41)
  • Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)
  • Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)

The above errors usually occur after upgrade Windows OS to latest version, install or uninstall CD or DVD recording program and/or install Microsoft Digital Image. Due to this, DVD Drive is not detected by Windows 10 Operating System, not showing in “Device Manager” and “File Explorer” of your computer.

In some cases, upgrading Windows Operating System to new version causes compatibility issues with System drivers like DVD is incompatible with current Windows 10 version. Many users have already reported that they have encountered “DVD Drive not showing in Device Manager, File Explorer”, “DVD Drive is not detected by Windows OS” or similar issues due to problem with DVD driver, outdated firmware or a factory defect. If you are one of them who are facing the same, you can follow the steps/methods below to fix.

How to fix DVD Drive not showing in Windows 10?

Method 1: Run “Hardware and Devices” troubleshooter

Step 1: Press “Windows + R” keys together from keyboard to open “Run Dialog Box”

Step 2: In the opened “Run Dialog Box”, type “Control Panel” and hit “Enter” key to open “Control Panel”

Step 3: In the opened “Control Panel”, type “Troubleshooter” in “search box” and click on “Troubleshooting”

Step 4: Under “Hardware and Sound” item, click on “Configure a device”

Step 5: Follow on-screen instructions to finish the troubleshooting process. Once done, please check if the trouble is resolved.

Method 2: Remove the IDE ATA/ATAPI Controllers

Step 1: Press “Windows + X” keys together from keyboard and select “Device Manager”

Step 2: In the opened “Device Manager”, click on “View” and choose “Show Hidden Devices”

Step 3: Now, locate and expand “IDE ATA/ATAPI Controllers” category

Step 4: Right-click on “ATA Channel” and select “Uninstall”

Step 5: (Optional), remove Intel Serial ATA storage Controller.

Step 6: Once done, restart your computer to see the changes.

Method 3: How to reinstall DVD Driver for Windows 10?

Sometimes, outdated DVD driver can cause “DVD not showing in Windows 10” issue. So, you can fix this issue by updating or reinstalling DVD driver.

Step 1: Open “Device Manager” and expand “DVD/CD-ROM Drives” category

Step 2: Right-click on DVD device and select “Uninstall”.

Step 3: Follow on-screen instructions to finish uninstall.

Step 4: After that, restart your computer. This will automatically install DVD driver in Windows 10.

Method 4: How to update DVD Driver for Windows 10?

Step 1: At first, you need to visit your DVD Drive manufacturer’s official website and download the latest drivers for your Windows 10, and save the setup file in your computer hard drive.

Step 2: Open “Device Manager” and expand “DVD/CD-ROM” category

Step 3: Right-click on DVD drive and select “Update Driver”

Step 4: In next window, select “Browse my computer for latest driver software” and follow on-screen instructions to install the latest driver in your device.

Step 5: Once done, reboot your computer to save the changes.

Method 5: Create new Registry keys

Step 1: Open “Run Dialog Box” and enter “regedit”, and hit “Ok” button to open “Registry Editor”

Step 2: In the opened “Registry Editor” window, navigate to following path.

“HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesatapi”

Step 3: Right-click on “ATAPI” and select “New > Key”

Step 4: Enter “Controller0” as name of the new key

Step 5: Click on “Controller0”, and in right pane, right-click on empty space and select “New > DWORD (32-bit) value”, enter “EnumDevice1” as name of new DWORD

Step 6: Now, open “EnumDevice1” DWORD’s ‘Properties’, and enter ‘1’ in “Value Data” input and hit “OK” button to see the changes. This way, you can fix DVD drive not working in Windows 10.

Create new registry keys using “Command Prompt” to fix

You can try to create new registry key using ‘Command Prompt’ if you don’t want to use “Registry Editor” App.

Step 1: Press “Windows + X” keys together from keyboard and select “Command Prompt As Admin”

Step 2: Now, type the following command in command prompt and hit “Enter” key to execute

“reg.exe add “HKLMSystemCurrentControlSetServicesatapiController0” /f /v EnumDevice1 /t REG_DWORD /d 0x00000001”

Step 3: Wait to complete the process. Once done, please restart your computer to see the changes and check if the problem is resolved.

Download or reinstall DVD Driver update in Windows 10/11 [Automatically]

You can also try to update all Windows drivers including DVD Driver update using Automatic Driver Update Tool. You can get this tool through button/link below.

⇓ Get Automatic Driver Update Tool

Conclusion

I am sure this post helped you to know about “DVD Driver for Windows 10” and how to download/install, and update or reinstall DVD Driver in Windows 10 to fix DVD not working issue. You can read & follow our instructions to do so. If this post really helped you, then you can share this post with others to help them.

People also asked for:

Q: How do I get Windows 10 to recognize my DVD drive?

A: It is quite simple to get Windows 10 computer to recognize your DVD drive. To do so, you need to Boot to the Windows 10 desktop, then launch Device Manager by pressing Windows key + X and clicking Device Manager. Expand DVD/CD-ROM drives, right-click the optical drive listed, then click Uninstall. Exit Device Manager then restart your computer. Windows 10 will detect the drive then reinstall it.

Q: Why the DVD Drive is not showing up?

A: The ‘DVD Drive is not showing up’ issue can be occurred due to some issue with DVD Drive Driver in your computer, issue with DVD Drive hardware like faculty connection or dead drive. You should make sure DVD Drive is properly connected into your PC’s motherboard and there is no issue with DVD Drive connection in your computer.

You can reinstall DVD Drive in your Windows computer just by restarting your computer. Windows should auto-detect the drive and reinstall the drivers for you. If your hardware is still not showing up in Device Manager, then you may actually have a hardware problem like problematic DVD Drive connection. You can fix DVD Drive hardware and its connection issue in order to fix.

Q:  How do I play DVD on my hard drive?

A: It is quite simple to play DVD on your hard drive. To do so, you need to Insert a blank DVD-RW in the DVD drive. Click the Browse button to select the Video_TS folder to burn to DVD. Select the DVD drive from the Drive drop-down menu. Then press the Burn button.

Q: How do I install DVD Drive in Windows PC?

A: If you want to work with DVD drive in your Windows computer, then make sure CD/DVD drive is properly installed in your computer. To install CD/DVD Drive in Windows PC, follow the steps below.

Step 1: Power down the PC completely.

Step 2: Open the computer to install the CD or DVD drive.

Step 3: Remove the drive slot cover.

Step 4: Set the IDE drive mode.

Step 5: Place the CD/DVD drive into the computer.

Step 6: Attach the internal audio cable.

Step 7: Attach the CD/DVD drive to the computer using an IDE cable.

Leave a Reply