Fix Restore point not working Windows 10 [Solved]

Windows 10 provides its users many useful features and System Restore is one of them. Whenever a user gets stuck with any issue, in most of the cases it has been observed that restoring the computer to a certain restore point have worked for the users, hence it is referred as one of the prominent features of Windows 10. But sadly several users have reported their grievance on forums that Restore point not working Windows 10. Considering the queries of several users, we are going to discuss about the same in this particular blog.

After investigating a lot about the issue we concluded that users face restore point not responding issue if the restore point is corrupted or damaged due to any reasons. It can also be encounter if the process of creating a restore point in Windows 10 is incomplete or may be your security software is blocking System Restore.

Well, if you are facing the above issue and have no clues about how to fix the issue then you can totally rely on this blog to bid goodbye to the issue. So without any further delay let’s get started with the discussion.

Fixes for Restore point not working in Windows 10

Method 1: Go for PC Repair Tool

Often times it happens when the user faces several PC issues/errors due to system corruption in such scenarios we suggest our users to scan their PC with the best recommended PC Repair Tool. This tool will scan the repositories and detect the issues in the software and after the complete scanning of the computer it will fix the issues automatically. It will not only repair the system but will also prevent the users from file loss, malware/viruses, hardware malfunctioning and not to mention will also optimize the computer for maximum performance.

⇓Get PC Repair Tool from Here

Method 2: Create Restore Point Manually

If you want to manually resolve your issues then try to create restore point manually and to do so follow the below mention steps:

Step 1: On your keyboard, press Win + S key>then enter Create a Restore Point>choose Create a Restore Point from the list

Step 2: You will be prompted with System Properties Window>click Create button and enter the name for your new restore point

Step 3: Now you need to check if the Restore Point is created, if yes then use the manually created restore points in the future.

If it didn’t works for you then you can also try to set the restore manually.

Method 3:  Run System Restore from Safe Mode

If the above method didn’t works for you then try to run System Restore from Safe Mode and to do so follow the below mention steps:

Step 1: Open Start Menu>tap on Power Button

Step 2: Press Shift key and click on Restart

 

Step 3: Once your system restarts then select Troubleshoot>Advanced Options>Startup Settings>tap on Restart

Step 4: Press F5 to select Safe Mode with Networking when your computer restarts again

Step 5: Once you entered into the safe Mode then try to perform System Restore

Method 4: Perform SFC Scan

This method demands you to run the SFC Scan and to do so follow the below mention guidelines:

Step 1: Press Win + X key>select Command Prompt (Admin) from the menu

Step 2: Once the Command Prompt opens, enter the below mention command and press Enter key:

sfc /scannow

Step 3: follow the on-screen instructions and wait till the process gets over

 Method 5: Perform the SFC Scan before the Windows Starts

Step 1: First of all restart your computer by following the first three steps from the earlier method.

Step 2: Select Troubleshoot once the list of option appears

Step 3: Select Advanced Options>Command Prompt

Step 4: You will be prompted to enter your credentials when your PC will restart so do that

Step 5: You have to find the letter of your Windows 10, so enter the below mention command and then press Enter key

wmic logicaldisk get deviceid, volumename, description

Step 6: You need in pay heed on Volume Name. In some of the cases Windows Volume Name will be assigned to D letter.

This is quite normal if you start command prompt before starting the Windows, In order to check the Windows drive, you need to check System Reserved Drive, in some cases it should be C.

Step 7: Press the below mention command tap Enter key:

sfc /scannow /offbootdir=C: /offwindir=D:Windows

Make sure to use the letters that you got from the earlier step, most of the times you need to use C and D but in case if you get different letters you should use them.

Step 8 The Windows will start the scanning the process so wait till the scanning gets over.

Step 9: Once the scanning gets finished close the command prompt and then start Windows in a normal way.

Method 6: Run DISM

If running the SFC, didn’t works for you then we suggest you to run the DISM. In order to run DISM, follow the below mention steps:

Step 1:First of all Type in cmd in search bar>right-click on the command prompt and then run it as an administrator

Step 2: Under the command line, copy paste the below mention lines one by one and press Enter after each command:

DISM /online /Cleanup-Image / ScanHealth

DISM /Online /Cleanup-Image /RestoreHealth

Step 3: Wait till the command gets executed, it will take up to 10-12 minutes

Step 4: Once done then Restart your computer

Method 7: Disable the Antivirus

Antivirus programmes are considered as the protective layer of the computer but sometimes it gets overprotective and acts as a barrier, so we suggest you to temporarily disable your antivirus software and then try to create or restore to a certain point.

Method 8: Check if the System Restore is enabled

To do so follow the below mention steps:

Step 1: On your Keyboard, press Win + R keys>type in gpedit.msc

Step 2: Under the left pane, go to Computer Configuration>Administrative Templates>System>System Restore

Step 3: Check the status of the settings: Turn off Configuration & Turn off System Restore. And if they are not set to Not Configured then double click each setting and set it to Not Configured

Step 4: Tap on Apply and then OK to save the changes

Method 9: Check your hard drive for errors

Several users have reported that they were facing the issue due to corrupted files and folders on your drive so you need to fix the corrupted files check your hard drive. The process will take some time so hold your patience and start the process by following the below mention steps:

Step 1: Press Windows key + X >choose Command Prompt (Admin) from the menu

            

Step 2: Once the Command Prompt opens the enter the below mention commands and press Enter

chkdsk /f /r X:

Note: Here X represents the letter of hard drive partition on your computer, so replace X with that.

Method 10: Check if the Services are running in a proper way

Step 1: On your keyboard press Win + S key and type in services.msc.>press Enter and click OK

Step 2: Once the Services Window Starts then locate the below mention services:

Microsoft Software Shadow Copy Provider Service

System Restore Service

Volume Shadow Copy

Task Scheduler

Step 3: You need to double click each of the services and then ensure that the Startup type is set to Automatic and that Service Status is set to Running.

Step 4: Click on Apply and then OK to save the changes>close Services Window and finally Restart your computer.

Method 11: Ensure at least 300 MB is used for System Restore by each partition

You must take care that each partition that has System Restore enabled requires at least 300 MB for System Restore to work in a proper way. To do so follow the below mention steps:

Step 1: Press Windows + S key and then type create a Restore Point

Step 2: Select Create a Restore point from the lists

Step 3: Select a hard drive partition and click Configure when the system properties Window opens

Step 4: Finally move the slider to adjust the amount of space that the System Restore will use.

Method 12: Modify the Registry

If you are still struggling with Restore point not working Windows 10, then try to modify the Registry and to do so follow the below mention steps:

Step 1: Navigate to search>type in regedit and open Registry Editor

Step 2: Then navigate to the below mention Registry Path:

HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NTCurrentVersionScheduleTaskCache

Step 3: Then backup the TaskCache Registry key>Right-click TaskCache and select Export on its context menu

Step 4: After that Enter a title for backup file>select a folder for it and then press the Save button

Step 5: Navigate to this key in the Registry Editor

HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows

NTCurrentVersionScheduleTaskCacheTreeMicrosoftWindows

Step 6: Right-click the Windows key >click Delete on its context menu

Step 7: Press the Yes button to confirm and then close the Registry editor>Finally Restart you’re your computer

Final Verdicts!!!

That’s all about Restore point not working Windows 10. I hope you liked the blog and now you can easily resolved your issue. Thanks.

Sakshi Anant Author

Leave a Reply