How to Fix Windows 11 restart to repair Drive Errors (Restart your PC to repair Drive Errors Windows 10 and Windows Server 2016 Explained)

Restart to Repair Drive Errors is a drive error notification received by Windows 10/11 users when it detects drive errors. When a Windows constantly detects error from a drive the user gets prompted with this error on every restart. This error gets prompted as a virus prompt but it’s not like that. It only implies that Windows has detected unexpected error while trying to read or write on one of your disk drives.

And if we talk about the potential reasons then it is vast and varies users to users. Different users may face this error due to different reasons and in different circumstances. But don’t worry if you are facing Windows 11 restart to repair Drive Errors or on Windows 10 version then just keep scrolling the blog till the end to get solution.

Why I am facing Restart to Repair Drive Errors?

As we have earlier mentioned that that Restart to repair Drive Errors click to restart your PC gets prompted on the user’s screen just because of hard drive issues. But when we dive deeper we found that there are several reasons to face the error such as failed updates, boated Windows Registry hard drive errors. And once the user gets prompted with this error they cannot open their files & folders on their system because the data on the disk becomes inaccessible. But don’t panic we have got some selected troubleshooting methods to resolve the trouble.

Try these fixes for  “Restart your PC to repair Drive Errors Windows 10” or “Windows 11 restart to repair Drive Errors”

Method 1: Restart your PC

Restarting your PC is the basic the basic step to resolve some Windows errors. Restarting the Windows remove glitch from your PC. So before proceeding with the other methods reboot your PC.

Method 2: Check your hard Drive status

It happens sometimes when your system fails to detect the hard drive errors and as a result users face so many inconveniences. So in order to tackle this try to connect your hard drive to another PC and if it’s working properly then it might be your SATA/PATA cable that would be at fault. So we suggest you to replace SATA/PATA cables and the check your hard drive.

But if the hard drive shows up an error while accessing it then it is possible that there may be corruption & bad sectors on your drive.

Method 3: Run CHKDSK Command in Safe Mode

In this method we suggest you to resolve the issue by running CHKDSK Command in safe mode. To do the same follow the below mention guidelines:

Step 1: First of all Restart your system and as the boot process begins, you need to start spamming the F8 key. It will open the Advanced Boot option.

Step 2: There you will see an option called “Safe Mode with Command Prompt.” Select it.

Step 3: Now the PC will begin booting and you will get the list of drivers. Then run CHKDSK after that wait for the wizard to finish the process and if the errors are minor they will be automatically resolved.

Method 4: Run DISM and SFC Scan

This is a built-in tool and we suggest you to use this tool as several users have claimed success after running these utility tools.

Here’s how:

Step 1: First of all boot from a bootable USB Drive and open the Command Prompt with Safe Mode> then write the following command on the command line given below:

dism.exe /Online /Cleanup-image /RestoreHealth

Step 2: Sometimes this may not work because the DISM can’t obtain the files online. So you can use your installation DVD or USB. Then insert it and write the following commands.

DISM.exe /Online /Cleanup-image /RestoreHealth /Source :C : RepairSourceWindows /LimitAccess

Now replace the C: RepairSourceWindows to your inserted DVD or USB path.

Follow the below mention steps to do a SFC Scan

Step 1: When you are on the recovery screen and open the command prompt, type in SFC /scannow and press Enter key.

Step 2: Now the scan ad repair process will be initiated so wait till the process gets completed.

Method 5: Run Automatic Startup Repair

Here in this method we suggest you to run an automatic Repair Tool t resolve the issue. To proceed with the process follow the below mention guidelines:

Step 1: First of all connect the installation disc to your PC, set boot priority for it in BIOS, and press F10 to save the changes & restart.

Step 2: Now press any key to boot from CD/DVD when prompted> on the first initial setup window, click Next

Step 3: After that Repair your Computer at the lower left corner> then click Troubleshoot in then choose an option interface, then go to Advanced Options and Automatic Repair or Startup Repair.

Step 4: Finally Restart your computer and see if the error still persists.

Method 6: Run System Restore in Safe Mode

Running the system restore is also a good decision to get past the issue. This function can restore your PC to an earlier date and make things normal for you. But note that the recently installed software will be deleted.

Here’s how:

Step 1: First of all click Restart while press & hold Shift key and then Windows will restart into Safe Mode. This process works for Windows 8/8.1/10/11.

Step 2: Then type System Restore in the search box and select it from the result list. And after that click Next.

Step 3: Select the recommended restore point and click Next. And if it’s not available, you can tick the second option & select a restore point.

Step 4: Finally follow the on-screen instructions to complete the restoration and restart your PC.

Method 7: Uninstall the recent Windows update

Several users have claimed that uninstalling the recent Windows update is also a good option to get past the above mention error. To proceed follow the below mention steps:

Step 1: Press Windows + I keys then go to the Windows Update> Update History>Now scroll down and select Uninstall Updates

Step 2: Now click the most recent Windows Update in the newly opened window, and then select Uninstall

You may also read: how-to-fix-scanning-and-repairing-drive-stuck-at-100-steps

Best Recommended Solution for Windows Errors

Though the above mentioned methods are quite effective but sometimes you need an expert to tackle some kinds of Windows errors. So considering the situation we strongly recommend you a PC Repair Tool to repair keep your system files intact and your PC error free. This is a professional tool and will handle all the errors including the current error without any hassle.

⇑Get PC Repair Tool from Here⇓

FAQs

How to fix restart to repair drive errors Windows Server 2016?

While going through several forums including Reddit, we noticed that so many users have reported “Restart to repair drive errors Server 2012/2016” error. And if you are looking for an effective solution to get past the error then you can use all the above mentioned methods except method 4 (Run DISM and SFC Scan steps) to resolve the error.

Restart to repair drive errors does nothing and doesn’t allow me to access the drives. Please help?

Hopefully, you will get it resolved by solving the drive errors that you are facing. Follow the steps mentioned above. Make sure that you execute theses steps carefully because a simple mistake could make the situation worse. If you are novice user then it is best that you repair the PC with the help of any automatic repair tool.

Restart to repair Drive Errors click to restart your PC doesn’t works for me. What can I do now?

Remember that simply restarting the PC alone doesn’t fix drive errors. There are series of steps and process that need to execute in order to fix this problem permanently. The proper solution has been explained above so read them carefully and hopefully the problem will get fixed. Otherwise, you always have the option to repair your PC drives with an automatic PC repair tool.

That’s all about resolving restart to repair Drive Errors Windows 10/11. We really hope you liked the blog.

Sakshi Anant Author

Leave a Reply