In this article, we are going to discuss on How to fix IPVanish error getting WireGuard configuration. You are provided here with easy ways to fix this error problem. Let’s starts the discussion.
What is IPVanish?
IPVanish is VPN (Virtual Private Network) service available for Microsoft Windows OS, macOS, Android OS, iOS, Fire TV, and manual configuration is available for Chrome OS, Windows phone, Linux and DD-WRT routers. IPVanish VPN features including IPv6 leak protection, DNS leak protection, OpenVPN scramble, SOCKS5 web proxy, Unlimited bandwidth, Unlimited P2P, IP address cycling, Port forwarding, Access via UDP/TCP, and Internet kill switch. IPVanish server owns and opiates more than 1500 remote servers in over 785+ locations.
What is WireGuard?
WireGuard is free and open-source software and communication protocol that implements encrypted VPNs, designed with purpose of ease of use, high speed performance, and low attack surface. This protocol uses ChaCha20 for symmetric encryption, Poly1305 for message authentication codes, X25519 for key exchange, SipHash for hashtable keys, and BLAKE2s for cryptographic hash function.
What is IPVanish error getting WireGuard configuration?
It is common issue relating to IPVanish VPN error occurred when you try to perform WireGuard configuration in your device. Several users reported about this error problem and explained when they tried to configure IPVanish VPN server with WireGuard in order to have access to their local network when they are outside home, then they experience some negative results as IPVanish error getting WireGuard configuration problem.
This issue indicates you are unable to configure IPVanish VPN with WireGuard in your computer for some reasons. On other hand, some users reported they faced IPVanish VPN not working issue when they tried to make IPVanish VPN connection on their device. The possible reasons behind the issue can be the issue with internet connection and speed, incorrect credentials and invalid subscription of IPVanish VPN, required administrator permission not given to IPVanish app.
This issue can be occurred due some issue with VPN protocol like WireGuard protocol and its configuration itself, corrupted/outdated IPVanish app, incorrect network settings, and other issues in your computer. If you are facing the same issue and looking for ways to fix the issue, then you are in right-place for the solution. Let’s go for the solution.
How to fix IPVanish error getting WireGuard configuration problem in Windows 10/11?
Method 1: Check your internet connection
This issue can be occurred due to some issue with your internet connection and speed. You can fix the internet connection issue just by resetting/restarting your network device (router, modem or WiFi device), and then check if it works for you toward resolving the issue. Also, you can try another stable internet connection/WIFI to fix the internet connection issue and fix this issue as well.
Method 2: Make sure you are enter correct credentials and check your subscription status
In order to fix the issue, you should make sure you are entering correct username & password to login into IPVanish VPN for the connection with WireGuard protocol. Also, you should make sure subscription of IPVanish is not expired if you don’t want to face the issue and if expired, you need to renew your subscription to fix the issue.
Method 3: Run IPVanish VPN app with administrator
You can provide administrator permission to IPVanish VPN app in your computer to fix the issue. To do so:
Step 1: Type ‘IPVanish’ in Windows Search Box, right-click on ‘IPVanish’ app and select ‘Open File Location’
Step 2: In the opened folder, right-click on executable of IPVanish VPN, and select ‘Properties’. Click ‘Compatibility’ tab and tick ‘Run this program as an administrator’ checkbox
Step 3: Finally, click ‘Apply > Ok’ button to save the changes, and once done, restart IPVanish app and check if the issue is resolved.
Method 4: Change IPVanish VPN protocols
Another way to fix the issue is to change IPVanish VPN protocols.
Step 1: Open ‘IPVanish’ app and go to ‘Settings’
Step 2: Click ‘Connection’ tab and change the active VPN protocol like change WireGuard to something else if WireGuard protocol is causing issue
Step 3: Once done, restart WireGuard VPN and check if the issue is resolved.
Method 5: Repair/install TAP Driver in Windows PC
IPVanish TAP Driver can cause conflict issue with other VPN TAP drivers. You can repair/install TAP Driver in computer to fix the issue.
Step 1: Open ‘IPVanish’ app and go to ‘Settings’ and click ‘Connection’ tab
Step 2: Click ‘Install/Repair’ button and restart IPVanish VPN app and check if the issue is resolved.
Method 6: Disable your antivirus/firewall
Interference of antivirus/firewall program in computer could be a reason behind this issue. You can disable your antivirus/firewall program temporarily in order to fix the issue, and then check if it works for you.
Method 7: Uninstall and reinstall IPVanish VPN app
If the issue is still persist, you can uninstall and reinstall IPVanish VPN app in computer to fix.
Step 1: Open ‘Control Panel’ app in Windows PC and go to ‘Uninstall a Program > Programs & Features’
Step 2: Find and right-click on ‘IPVanish’ VPN app, and select ‘Uninstall’ to uninstall it and after that, restart your computer
Step 3: After restart, download and reinstall IPVanish VPN app from official site in your computer, and then re-launch IPVanish app and check if the issue is resolved.
Method 8: Perform IPconfig reset, IPv4 & IPv6 reset, flush DNS cache, and other network relating settings
You can perform this operation in your computer to fix this error problem.
Step 1: Press ‘Windows + R’ keys on keyboard, type ‘cmd’ in ‘Run’ window and press ‘CTRL + SHIFT + ENTER’ keys on keyboard to open ‘Command Prompt as Administrator’
Step 2: Type the following commands and hit ‘Enter’ key after each to execute them.
ipconfig /release
ipconfig /flushdns
ipconfig /renew
netsh int ip reset
netsh winsock reset
netsh interface ipv4 reset
netsh interface ipv6 reset
netsh winsock reset catalog
netsh int ipv4 reset reset.log
netsh int ipv6 reset reset.log
Step 3: Once executed, restart your computer and check if the issue is resolved.
Conclusion
I am sure this post helped you on How to fix IPVanish error getting WireGuard configuration in Windows 10/11. You can read & follow our instructions to do so. That’s all. For any suggestions or queries, please write on comment box below.
Q/A:
Q1: How to switch between different protocols on IPVanish VPN?
A: Protocols like WireGuard protocol is prime reason for IPVanish error/ IPVanish VPN not working or connecting issue. However, you can change protocols in IPVanish Client to something else from available protocols to fix the issue. To do so:
Step 1: Open the IPVanish client and enter your login details.
Step 2: Click Settings under the cogwheel icon on the left, and choose the tab Connection.
Step 3: This menu will show a drop-down list of protocols, including WireGuard, OpenVPN, IKEv2, and others. The protocol selection depends on your device and OS.
Step 4: Click on the toggle and scroll down the list to change your current selection.
Q 2: IPVanish VPN Alternatives
A: If you are facing issue with IPVanish VPN in your computer like IPVanish error getting WireGuard configuration problem or other issues, then you can try some other VPN solutions as effective solutions to use VPN connection in your computer. Here the list of some best IPVanish alternatives:
- NordVPN
- Surfshark
- PrivateVPN
