How to Fix PS4 error ce-32895-7 [Easy Steps]

What is ‘PS4 error ce-32895-7’ issue?

If you are experiencing ‘PS4 error ce-32895-7’ or ‘An error has occurred (CE-32895-7)’ on PlayStation 4 (PS4) while trying to connect to WiFi network or when trying to install pending firmware update on PS4, then you are in right place for the solution. Here, you will be guided with easy steps/methods to resolve the issue. Let’s starts the discussion.

‘PS4 error ce-32895-7’: It is common PlayStation 4 (PS4) error usually appeared when you try to update PS4 System firmware or while connecting your PS4 to WiFi network. This error code indicates the PS4 (PlayStation 4) won’t have a RootCA certificate and this cause issue with the server certificate. There could be several reasons behind this issue including TCP/IP irregularity, PS 4 connected to restricted network, issue with PS4, failed pending firmware update on PS4 and some internal glitches in PS4.

PS4 error ce-32895-7 can be occurred if you are not currently connected to your home network and possibly due to restriction imposed by the network administrator. In such case, you need to ask or contact network admisntrator to remove the restrictions for you, and check if the error is resolved. This issue can also be occurred due to bad configured TCP/IP or due to TCP/IP inconsistency in your device. You can reset your router and re-establish the connection in order to fix the issue.

Another reason behind this issue can be the pending System firmware update on PS4. You will need to initiate the firmware installation from Safe Mode in case you are not able to do it conventionally. Also, this problem can be occurred due to some issue with hardware itself like issue with network card. You will need to take your PS4 device to service center to investigate any underlying hardware issues. Let’s go for the solution.

How to fix PS4 error ce-32895-7?

Method 1: Try connecting PS4 to non-restricted network

This issue can be occurred if you are trying to connect your PS4 to some restricted network for example, the public network like Schools. In such case, you can contact the network admin to remove the network restrictions and allow your PS4 to access their network. Also, you can try finding and connecting to other non-restricted network and check if the issue is resolved.

Method 2: Reset your router/networking equipment

This issue can be occurred due to TCP/IP inconsistency of your router/networking equipments. This issue can also be occurred due to some temporary glitch in your router. Resetting router can resolve the issue by TCP/IP assignment modifications back to their default values.

Step 1: Disconnect all connected devices from router and make sure your router is turned ON

Step 2: Press & hold ‘Reset’ button your router with sharp object until you see all front LEDs flashing at the same time.

Step 3: Once reset is finished, connect your device to router and re-establish the connection and check if the issue is resolved.

Method 3: Update PS4 firmware software in Safe Mode

If you are unable to update firmware in PS4 due to this error or pending firmware update is causing this error, then you can try updating PS4 firmware software in Safe Mode.

Step 1: At first, you need to go to ‘Notifications’ penel from your PS4 console’s main dashboard, and see if the update prompt is there. If it is, press ‘Options’ key and select ‘Delete’ it from notifications panel

Step 2: Once deleted, turn OFF PS4. To do so, press & hold ‘Power’ button on PS4 until you hear the fans physically shutting OFF.

Step 3: Now, press & hold ‘Power’ button again until you hear 2 consecutive beeps and the release ‘Power’ button. Your PS4 console should enter Safe Mode

Step 4: Now, connect your controller with your cable and press ‘PS’ button to initiate the connection

Step 5: Once you are in Safe Mode, select ‘Option 3: Update System Software’, from the list of available options, select ‘Update using internet’ and wait to finish update process. Once done, restart your PS4 console and check if the issue is resolved.

Method 4: Rebuild Database

One possible way to fix the issue is to rebuild the database in PS4.

Step 1: Turn ON your PS4 in Safe Mode using above method and connect your PS4 to PlayStation 4 DualShock 4 Controller using USB cable

Step 2: Now, press ‘PS’ button controller to enter into Safe Mode and select ‘Rebuild Database’ option. Wait to finish the process and once done, restart your PS4 console and check if the issue is resolved.

Method 5: Service your PS4 console

If the issue is still persist, then you can try to fix the issue by contacting service center or contact Sony Live Agent from their official contact page and get a hardware ticket. This way, you can fix any hardware related issue in PS4 if causing this error, and after the repairing service, check if the issue is resolved.


I hope this post helped you on How to fix PS4 error ce-32895-7 with several easy steps/methods. You can read & follow our instructions to do so. We discussed here that PS4 error ce-32895-7 error is usually appeared due to network restrictions, TCP/IP inconsistency, issue with hardware, pending firmware update and others, and you are provided here with steps to fix. That’s all. For any suggestions or queries, please write on comment box below.

Samir Prakash Author