What is ‘The current input timing is not supported by the monitor display’ error on PC’s Monitor?
In this article, we are going to discuss on How to fix The current input timing is not supported by the monitor display error on PC’s monitors. You will be guided with easy steps/methods to resolve the issue. Let’s starts the discussion.
‘The current input timing is not supported by the monitor display’ error: It is common problem associated with PCs’ monitor issue. This error is usually appeared when you open certain applications or at the very start of booting procedure. According to report, this error is mostly appeared on Dell Monitors. The error s appeared with message saying:
‘The current input timing is not supported by the monitor display. Please change your input timing to ‘1920X1080@60Hz’ or any other monitors listed timing as per the monitor specifications’
The possible reasons behind the issue can be the monitor resolution or refresh rate settings that are set outside its allowed resolution or refresh rate. You can fix the issue by booting your PC in Safe Mode and change the Display Settings to correct values. This issue can be occurred due to faculty monitor cable means the cable connecting to PC to monitor might start to defect.
In such case, you can disconnect and then reconnect PC to monitor cable in order to fix the issue. If the issue is still persist, you can try a different PC to Monitor cable and check if it works toward resolving the issue. It is possible to fix the issue with our instructions. Let’s go for the solution.
Table of Contents
How to fix The current input timing is not supported by the monitor display in PC’s monitor?
Method 1: Boot your computer in Safe Mode and then change resolution & refresh rate in Display Settings
One possible way to fix the issue is to boot your computer in Safe Mode and then apply certain changes in Display Settings like change resolution & refresh rate to allowed values.
Step 1: At first, insert Windows Installation Media DVD/USB into your computer and press any key when prompted to boot from it.
Step 2: At initial screen, click ‘Repair your computer’ option at bottom-left corner to open ‘Windows Recovery Environment’ screen
Step 3: Once you are in Windows Recovery Environment screen, go to ‘Troubleshoot > Advanced Options > Startup Setings’ and click ‘Restart’ option
Step 4: Now, on ‘Startup settings’ page, press ‘4’ or ‘F4’ to select ‘Enable Safe Mode’ option and boot your computer into Safe Mode
Step 5: Now, open ‘Settings’ App in Windows PC via Windows Search Box and go to ‘System > Display’, change the resolution and refresh rate to recommended values. Keep in mind that the refresh rate can’t be modified from here unless your monitor supports multiple refresh frequencies.
Step 6: Once done, restart your computer and boot your computer in normal mode and then check if the issue is resolved.
Method 2: Use a different PC to monitor cable
This issue can be occurred due to some issue with the cable connection between PC and monitor. You can disconnect and then reconnect your PC to monitor cable and then check if it works for you. If not, you can try using a different PC to monitor cable for connecting your PC to monitor, and check if the issue is resolved. You should look for shorter but higher quality cable instead of looking at the length.
Method 3: Update graphics card driver
Another possible way to fix the issue is to perform graphics card driver update in your computer. You can update your all Windows drivers including graphics card driver update using Automatic Driver Update Tool. You can get this tool through button/link below.
⇓ Get Automatic Driver Update Tool
Fix Windows PC issues with ‘PC Repair Tool’:
‘PC Repair Tool’ is easy & quick way to find and fix BSOD errors, DLL errors, EXE errors, problems with programs/applications, malware or viruses issues, system files or registry issues and other system issues with just few clicks. You can get this tool through button/link below.
⇓ Get PC Repair Tool
Conclusion
I am sure this post helped you on How to fix The current input timing is not supported by the monitor display on PC’s monitor with several easy steps/methods. You can read & follow our instructions to do so. That’s all. For any suggestions or queries, please write on comment box below.
