nyone who plays games on a regular basis knows the importance of a gamepad while playing some of their favorite games. Some might prefer Mouse and Keyboard but almost every gamer seems to enjoy playing with a controller or gamepad once in a while. For that reason you need to connect your joystick or gamepad.
In most cases, controllers are plug and ready to use. Unfortunately for many users their gamepad not recognized Windows 10 when they plug it into their computer. For that reason we have listed all the solutions and methods below.
Step 1: Open Settings by pressing Win + I on the keyboard.
Step 2: Locate Update and Security.
Step 3: From the menu click Troubleshoot.
Step 4: Now select Hardware and Devices and click Run the troubleshooter button.
Step 5: Complete the setup by following the on-screen instructions.
Unplug Plug and Play Devices
Sometimes why your gamepad is not recognized is because of the excessive devices plugged into your computer. Disconnect all the plugged devices that are not in use and see if the problem persists.
And, if you are using a hub device for your USB connections then disconnect and connect the gamepad directly to your computer.
In some rare case, why your device isn’t recognized is because of the port bandwidth. If your controller supports only USB 2.0 then disconnect if from the USB 3.0 port and connect to its corresponding bandwidth port and vice-versa.
Disable Automatic Turning off Plugged Device
Step 1: Open Start menu and click Search box.
Step 2: Type Device Manager and press Enter.
Step 3: In Device Manager, expand USB Serial Bus controllers.
Step 4: Right click on the USB Root Hub and select Properties.
Step 5: Navigate to Power Management and un-tick all the boxes box named Allow the computer to turn off this device to save power.
Change Your Power Plan
Step 1: On keyboard press Win + S to open search bar.
Step 2: Type power setting and press Enter.
Step 3: In Power Setting menu select Power and Sleep Settings.
Step 4: Click Additional Power Settings and go to Power plan settings.
Step 5: In change plan settings, click Change advanced power settings.
Step 6: Go to USB settings > USB selective suspend setting.
Step 7: Set it to Disabled and Click Apply then OK to save your changes.
Install USB Hub Drivers
Step 1: Open Device Manager. Steps are mentioned above.
Step 2: Locate USB Root Hub and right-click on it.
Step 3: Choose Update driver and select Browse my computer for driver software.
Step 4: Select Let me pick from a list of available drivers on my computer.
Step 5: Select USB Root Hub from the list and click Next.
Repeat steps 2-5 for all USB Root Hub drivers.
Installing or updating drivers manually can take a lot of time and most of time not the latest available. Therefore, we would suggest you to update your latest available drivers automatically. Our Driver update tool, download the drivers for your computer from original source with a single click.
Run Your Gamepad in Compatibility Mode
Step 1: Right-click on your Gamepad software and select Properties.
Step 2: Go to Compatibility tab and tick the box beside Run this program in compatibility mode for and choose your operating system prior to Windows 10 from the list.
Step 3: Click Apply then OK.
Reboot your system and see if your gamepad is working.
Reinstall Your Gamepad
Step 1: Open Device Manager. If you want help steps are mentioned above.
Step 2: Locate your gamepad on the given list and right click.
Step 3: Select Uninstall Device and click Confirm on the pop-up.
Step 4: After the process is complete restart your computer.
Your computer will look for the missing driver and install it. After that, check if your gamepad is recognized.
Check your controller or gamepad as well on the other device if possible whether it’s the hardware issue or the software issue. There are numerous cases just like yours and is pretty common. Don’t worry we have given you all the possible methods and solution with steps for you to follow and resolve your gamepad no recognized Windows 10 issue.