Network discovery is the process through which computers and network devices are able to find each other. It enables network devices over a local network to connect and communicate with PC or other devices connected with it.
This feature is automatically enabled when you are connected to private network like home, office etc. On the other hand, when you are connected to public network, then network discovery feature is disabled. Due to this, you won’t be able to allow your computer to be discoverable on those networks.
Many users have reported “network discovery is turned off windows 10” problem after updating Windows 10. However, if Windows 10 cannot view other devices on your network, it could be because of two reasons:
Network discovery is disabled
You either log-in to the incorrect network which means public instead of private
Once network discovery are enabled, you can easily share files and devices like printer with other computers within the same network.
If you are facing the problem, then go through this guide carefully as it will provide you instructions that will help you to resolve the problem:
Turn on Network discovery: If you think that your network discovery is turned off then you need to enable it by going through the below mentioned steps:
Select the Start menu and launch Settings
Once opened, press Network and Internet > Status. In the right pane, select Change advanced sharing settings.
After that tap on Private Network
Once clicked, go to Network discovery section and choose Turn on network discovery
Check the Turn on automatic setup of network connected devices box and tap on save changes.
After that check if the problem is removed.
Setup Firewall Settings: If Firewall settings are deactivated on your PC then the network discovery doesn’t works correctly. To fix this issue, you need to configure the firewall settings. To do so, go below steps:
Tap on start and choose Control Panel > from their select System and Security
After that Windows Firewall should be clicked > Then after press Allow an app or feature Window Firewall
Press on change settings and then scroll down and look for Network discovery. Enable it for your network profile and then click on OK to save changes.
Activate dependency services: This problem can also be caused due to dependency services that include SSDP Discovery, DNS Client and UPnP Host. To check if each of these it activated, follow these steps:
Right-click on the start button and choose Run
Once done, type services.msc command to open Service Manager
Now check, if each of the services is started then should be set to Automatic
After finishing, reboot your system.
To enable Network discovery, use Command Prompt:
Click Start and type CMD > from the search results, right-click on Command Prompt > Select Run as administrator
In the elevated command prompt, type: netsh advfirewall firewall set rule group=”Network Discovery” new enable=Yes and then Press Enter. This will turn on Network Discovery.
To turn off Network Discovery for all your network profiles, go back to the elevated command prompt, and type: netsh advfirewall firewall set rule group=”Network Discovery” new enable=No then press Enter and close the window.
To fix network discovery is turned off windows 10, upgrade Network Adapter: There might be lots of problems with network-related features, if your network adapter is corrupted. You can try updating it, to fix such type of issues. To d o so, follow the steps:
Open Devices Manager and find your network adapter.
Right-click the driver and select Update driver from the context menu.
Click Search automatically for updated driver software in the pop-up window and follow the onscreen instructions to finish the update. After that, restart your system.
Fix Troubleshooter: If the Network discovery doesn’t function properly, then you need to run troubleshooter. To do so, follow the given instructions:
Navigate to Windows Settings > Update & Security > Troubleshoot.
Click Network Adapter and hit run the troubleshooter.
To complete the process, follow the onscreen instructions.
Then, choose Shared Folders and run its troubleshooter as well.
Reorganize Network settings: If none of the above mentioned solution helps you to fix the problem then you are advised reset your network. This will change all the network related settings to the default without removing the data on your PC. To do so, simply you need to open settings and go to Network and Internet. In the Status section, tap on network reset. After resetting, restart your machine to see whether the problem is fixed.
Recommended solutions to solve network discovery is turned off windows 10
Well, there are several ways through which you can fix network discovery is turned off windows 10 problem. But if you are not a technical person and find difficulty to perform the manual steps then you are advised to use PC Repair Tool. This is one of the best and easy ways to fix any Windows error.
It will scan your entire OS, detects the errors and solve them automatically. Not only this but this tool also fixes other errors such as registry, game, DLL and much more. To get this tool, you just need to download and the rest of the work will be done hassle-free.
